RYUKA BLOCK POT CUBE | Tingara

3D Print Data — This is not a finished physical planter.

Prices include applicable taxes.

$7.00

RYUKA PRINT STANDARD PLAN

This is a digital product: print-ready data for 3D printers. It is not a finished planter.

Included (2 files)

Pot body — (size)_POT.gcode.3mf
Dedicated saucer — (size)_SAUCER.gcode.3mf

Source data such as STL is not included. Print the two files separately.

One-time purchase, no subscription. You may print and use it personally, and you may sell the printed items. There is no expiry date, except where your rights end or are suspended under our Terms of Service. Redistribution or resale of the data itself is prohibited.

N-06 “Tingara” — NATURE collection.

An openwork planter inspired by the traditional Okinawan hanaburokku (flower block).

Supported printers (14 models)

Bambu Lab

A1 mini
A1
P1P
P1S
P2S
A2L

Creality

K1C
K2 Pro

Flashforge

Adventurer 5M
Adventurer 5M Pro
AD5X (Adventurer 5X)

ELEGOO

Centauri Carbon
Centauri Carbon 2 / Combo
Neptune 4 Pro

After purchase, select your printer on the machine selection screen. You will receive the pot body and its dedicated saucer prepared for that specific model.

Files are pre-sliced G-code. 6 Bambu Lab models are generated with Bambu Studio, and 8 models with manufacturer profiles in OrcaSlicer 2.4.2. No re-slicing is required.

⚠ Always use the file for your own printer model. Do not print data intended for a different model.

Sizes and print estimates

S (approx. 3-go)

Dimensions (max width × height)
Pot 83 mm × 80 mm
Saucer 88 mm × 18 mm

Pot — 123.1 g / 8 h 26 min
Saucer — 20.9 g / 46 min
Set total — 144.0 g / 9 h 12 min

M (approx. 4-go)

Dimensions (max width × height)
Pot 107 mm × 104 mm
Saucer 112 mm × 19 mm

Pot — 211.1 g / 15 h 35 min
Saucer — 28.5 g / 58 min
Set total — 239.6 g / 16 h 33 min

L (approx. 5-go)

Dimensions (max width × height)
Pot 129 mm × 126 mm
Saucer 134 mm × 22 mm

Pot — 286.7 g / 22 h 15 min
Saucer — 39.8 g / 1 h 13 min
Set total — 326.5 g / 23 h 28 min

※ Material and print time are values calculated when slicing the distributed data in Bambu Studio for the Bambu Lab A1 mini. They are not measured results and will vary with the printer you select and your printing environment.
※ Times are rounded up to the minute for each file, then added together.

[About our verification] For all models, the distributed data passes preset preflight, a full G-code safety scan, outlier detection and checksum verification. Physical test printing on our side has been performed only on the Bambu Lab A1 mini. Results may vary depending on how your printer is tuned.

[About filament] Our print settings are based on Bambu PLA Matte. If you use filament from another brand, we recommend running Flow Dynamics Calibration before printing. Without it, the internal gyroid structure may show stringing or blobs. (In other slicers this setting may be called "Pressure Advance".)